fish Rod locking lever clamping size
1. Fixture can be rotated 180 degrees,using the CONVEX surface of locking lever of the sihing rod.the thinner fishing rod(diameter 5-15mm/0.2-0.6in)can be clamped; using the CAMBER concave can clamp the thicker fishing rod (diameter 15-28mm/0.6-1.1in),
2. Clamping bobbin range: 5mm-23mm (0.2-0.9in) bore, 10mm-145mm (0.4-5.7in) thickness of the reel operation
ASSEMBLY STEPS
1. unscrew the small screw cap on the locking arm and put the shaft on the locking arm into the bearing of main body carefully screwing the small screw cap on the lock arm shaft.fix them together(don`t tighten the small screw cap too tightly,or it will slip easily.)
2. install the line winder,lock the handle. screw at the other side of the locking arm.
3. Using rod locking rod concave convex surface locking in the fishing rod（the clamping force is slightly large than the line winder weight will be great to prevent the damage to fish rod）
4. install the fish line to the fish line spooler, adjusting the locking handle and the clamping force
5. winding the fish line on the fish reel, then you can start winding
TIPS:
1. drop a little oil on the stainless steel ball before winding the fish line will make it smoother. Issued a beautiful bobbin sound
2. Spool of the spool just as appropriate, too tight will issue a fricative, if the sound is too large, please adjust the grip a little loose